mp145
Error E5 : ink cartridges are not installed properly
  1. Tekan dan tahan tombol power on
  2. Colokan kabel listrik (tombol power masih ditekan terus)
  3. Tekan reset 1x, lepas tombol power, tekan reset 2x, sampai display 0
  4. Tekan tombol + untuk mengubah display 0 jadi 1
  5. Tekan kembali tombol power, printer akan mencetak 1 halaman
  6. Buka cover printer
  7. Lepas kabel power
  8. Lepas tinta PG40 dan CL41
  9. Colok kembali kabel power
  10. Tekan tombol power
  11. Buka scan cover
  12. Pasang kembali PG40 dan CL41

Error E61 : Reset waste ink counter

  1. Matikan printer, tekan dan tahan tombol reset lalu tekan power
  2. Tahan tombol power jangan dilepas dulu, lepas tombol reset, tekan reset 2x
  3. Lepaskan kedua tombol, printer akan masuk ke service mode
  4. Tunggu sampai printer berhenti charging
  5. Tekan reset 4x lampu on/off akan berubah-ubah hijau orange setiap tekan reset
  6. Matikan printer, lepas kabel power (untuk mp160 cukup matikan tombol power)
  7. Tunggu sesaat (sekitar semenit) pasang lagi dan hidupkan lagi.
  8. Sampai di sini printer sudah jalan dan tak perlu memakai software resetter.
Berikut daftar kode error printer canon mp:
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed,
or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 – Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error –
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error – USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error
Cara lain gunakan resetter yaitu mp tool. Masuk dulu ke low level mode:

-> Matikan printer

-> lepas kabel power dari printer

-> Tekan dan tahan tombol power printer

-> Sambungkan kembali kabel power printer

-> Tekan dan lepas tombol resume

-> Lepaskan tombol power, dan printer dikenali sebagai hardware baru, install lagi drivernya.

Download resetter : Canon MP Resetter
Download driver : Canon MP145